Frequently asked questions
Does it stop the gutter getting crushed?
There are rubber pads on the clamp mechanism to prevent scratching. Once the Lock Jaw is installed the ladder won’t move
Which ladders will Lock Jaw work on?
Lock Jaw will work on the majority of ladders however there are some circumstances where it won’t work.
Will Lock Jaw work on telescopic ladders?
It will fit on some but not all telescopic ladders. In some cases the bar does not wind down far enough to clamp the ladder and therefore it cannot be used. Although in some cases it does work depending on the make and model.
Why use Lock Jaw?
Climbing ladders are extremely dangerous with hundreds of thousands of people injured from ladder falls.
There are also legal requirements in most countries to secure a ladder.
In Australia:
- Work Health and Safety Act 2011 – 306L
- Work on a ladder
- Work Health and Safety Regulation 2011
Managing the risk of falls at workplaces Code of Practice 2021 -WHSQ
What is the widest ladder rail that the product will fit?
The Lock Jaw Ladder Grip can accommodate ladder rails up to approximately 50mm wide.
Do I need to use one or two Lock Jaw Ladder Grips?
The product is designed to work as a single unit. We find that persons accessing multi-storey buildings or climbing regularly often opt to use two units (one on each side of the ladder). Two units offer greater stability.
What types of guttering can the device be used on?
The Lock Jaw Ladder Grip can be used on the majority of guttering, including both traditional and box guttering. Put simply, if you can place the jaws of the unit over the edge of your guttering the device will work.
How do I carry the device up the ladder?
The Lock Jaw Ladder Grip is supplied with a carabiner which can be clipped onto your belt loop or work belt. So you can maintain 3 points of contact which is best practice when climbing a ladder.
Where was the Lock Jaw Ladder Grip invented?
Lock Jaw Ladder Grip was co-invented by Craig and his father Robert Charlton in 2009 after experiencing an injury whilst working on a ladder. It was invented in Australia and there have been countless hours spent on engineering and testing to perfect the design
Is the Lock Jaw Ladder Grip patented?
Yes. The device holds both Australian and international patents in addition to trademarks.
Who uses the Lock Jaw Ladder Grip?
We sell to a broad range of customers ranging from insurance companies, fire departments, home handypersons, builders, plumbers, roofers solar installers and electricity companies to name a few. The product will suit anyone who needs to access a roof using a ladder that will be rested on guttering.
What is the device made of?
The Lock Jaw Ladder Grip is made from high grade Nylon plastic and metal components. The product is durable and long lasting and will last many years.
Will this work on a Xtend & Climb Ladder?
Yes, this is the same ladder as the telesteps ladder and as long as you adjust the Lock Jaw properly, it will work on the Extend & Climb. It won’t be as snug fitting as a rectangular style ladder would be but would certainly add stability.
Does this work on K style gutters?
Yes. it will work with the various adjustments. There are rubber grips to protect the ladder.
Does it work on all gutters?
It works on most metal gutters. The gutter needs to have a lip for the jaws to secure under. We only recommend Lock Jaw to be used if you are prepared to rest a ladder on the gutter.
Is this product compatible with a gutter installed with a leaf guard?
Lock Jaw Ladder Grip needs to clamp onto the inside of the gutter. If the leaf guard can be lifted up (some plastic guards can be lifted), the Lock Jaw can be applied. If however it is metal guard that is fixed, the Lock Jaw Ladder Grip cannot be used.
Is there an attachment to work with the Xtend ladders?
Lock Jaw Ladder Grip works on Xtend ladders. We have customers that use the telescopic ladders and it works very well. The side bar extends and contracts and works on almost all ladders on the market.
Where can I purchase the Lock Jaw Ladder Grip?
We sell worldwide via our website or through Amazon. Go to our Checkout page to find our pricing and any duty and taxes that apply. There are distributors in countries all over the world.
Would not this pull off the gutter?
We only recommend using Lock Jaw if you are prepared to rest your ladder on the gutter. If the gutter is unstable then we wouldn’t recommend putting any equipment on it
Do I need two hands to set up the device?
There is a carabiner that clips to a belt and Lock Jaw can be applied with one hand. It locks on in 5 seconds and can be removed in seconds.
Does it meet OSHA standards?
It meets the general requirements of ANSI-ASC A14.8-2013. OSHA recommends securing your ladder
What are the standards Lock Jaw meets?
There aren’t standards. In Australia, Europe, Canada and most countries internationally. We have had the product tested including static load testing and it has been used successfully since 2009.
What happens if the device does not suit my gutter or ladder?
We offer a 30 day no questions asked money back guarantee. All we ask is that you pay for the return postage.
What do people say about Lock Jaw?
Lock Jaw is used by Tradesmen and DIY all over the world. Solar Installers, Power Companies, Electricians, Roofers, Plumbers, Utility Companies and maintenance workers.
We have reviews on Google: Check our reviews.
How is the gutter safeguarded against bending and scratching caused by your ladder?
There are rubber pads on the lock Jaw. It can also be used with a gutter protector. The Lock Jaw holds the ladder very tightly to the gutter and reduces movement hence scratching.